My Cart

Your Shopping Cart is Empty

RHINO LARGE VIEW GRINDER - RED

RHINO LARGE VIEW GRINDER - RED
Click to enlarge

More images

Click to enlarge
Price: $99.00
E-mail to a friend

Purchase

Description

Featuring an AUTO-DARKENING LARGE VIEW LENS WITH GRIND MODE, the viewing area on this Rhino Welding Helmet is more than 10 square inches, 4" x 2.6". In comparison, standard view lenses are about half that size, providing 5 square inches on average.

Large View lenses allow DOUBLE THE WELDING VISION. Double your vision with a Large View Rhino Welding Helmet.

Continuous ultraviolet and infrared protection is provided by the nylon shell. Both lightweight and flexible, this design is ideal for reduced fatigue and increased durability. Many helmets sold today are manufactured from heavier materials resulting in designs that are more rigid. The heavier weight can lead to accelerated fatigue and other problems especially when the helmet is worn for longer periods of time. In addition, rigid designs are much more prone to crack or shatter during an accidental impact.



Light/Dark States - Shade #4 & Grind Mode / Shades #9-13

Reaction Time - 1/25,000 second

Low Battery Indicator - Signals for the replacement of both batteries

Power Sources - Solar panel and two replaceable lithium CR2032 batteries

Arc Sensors - Two, Independent and Redundant

Headgear - Ratchet style with headband

Weight - Slightly less than 1.2 pounds including headgear

Safety - Conforms to ANSI Z87.1 / CE / CSA / AS/NZS / EN379 / ISO9001-2008

MSRP - $149

Lens Covers - Interior and Exterior lens covers come installed. Additional lens covers are available in packs of 6, 18, and 48 and can be found within the "Accessories" category.

Delay - Time interval for the lens to remain dark after welding has ceased - adjustable between 0.15 - 0.80 seconds

Sensitivity - Changes the amount of light/arc required to darken the lens. Extremely useful for adapting to variable light conditions and a wide range of welding processes.

Please Note: This helmet is not suitable for "overhead" welding applications, laser welding, or laser cutting applications.



The information provided is for purchase suitability purposes only. Minimum protective shade levels for each welding process and arc current are different. Proper research, specific knowledge, and training are required for safety.

When safely operated, this welding helmet provides protection for the following welding processes and arc current (amperes, amps):
Source: Safety and Health Fact Sheet No. 31, American Welding Society.

Stick Electrodes, Shielded Metal Arc Welding, SMAW: Up to 550 Amps with electrode sizes of 3/32"(2.4mm)-More than 1/4"(6.4mm)

MIG, Gas Metal Arc Welding, Flux Cored Arc Welding, GMAW, FCAW: Up to 500 Amps

TIG, Gas Tungsten Arc Welding, GTAW: 5-500 Amps

Air Carbon (Light) - Up to 500 Amps

Cutting, CAC-A (HEAVY) - 500-1000 Amps

Plasma Arc Cutting, PAC - Up to 800 Amps

Plasma Arc Welding, PAW - Up to 800 Amps



2-Year Warranty - The warranty covers defects/flaws in manufacturing and workmanship for all components. Accidental/Intentional physical damage such as a cracked shell is also covered under warranty with the exception of the lens/filter unit. A physically damaged lens/filter unit voids the warranty (i.e. crack/scratch on the liquid-crystal display exterior/interior or damage to the solar panel.)

Product Reviews

Login or Register to write the first review.